Pro Ice Bath with Chiller

For optimal performance, clean your ice bath chiller’s filter every time you change the water. Here’s how:

1. Remove the filter from the unit.
2. Rinse the filter and housing thoroughly using a brush, hot tap water, and dishwashing detergent.
3. Reinstall the filter—it’s that simple!

For a deeper clean:
If you want a stronger sanitising solution that keeps your ice bath cleaner for longer, food-grade hydrogen peroxide works best.

Simply:

• Mix with water in a spray bottle to acheive a 3%–6% dilution.
• Apply, scrub, then rinse well with water.

Regular cleaning keeps your chiller running efficiently and helps keep your water fresh!

With the portable ozone generator running for at least one hour per day, you’ll rarely need to change the water—as long as debris isn’t building up in the bottom of your ice bath.

The ozone generator keeps your water crystal clear and free of algae, bacteria, and viruses. In most cases, the only reason to change the water is if debris (like dirt, grass, or other particles) accumulates from entering and exiting the bath.

Pro Tip: Keeping the area around your ice bath clean helps minimise debris and extends the time between water changes.

With regular ozone treatment and a little maintenance, your ice bath stays fresh and clean with minimal effort!

The Portable Ozone Generator helps keep your ice bath water clean and fresh by naturally sanitising it. It works by producing ozone (O₃), a powerful disinfectant that kills bacteria, viruses, and algae without the need for harsh chemicals like chlorine.

Key Benefits:

• Eliminates Odors – Keeps water smelling fresh.
• Reduces Maintenance – Less cleaning and water changes.
• Chemical-Free – A natural alternative to traditional sanitisers.

1000 mg/h

1. Turn the chiller off.
2. Close the tap on the ice bath drain.
3. Disconnect the hose (that is connected to the ice bath drain) from the chiller end first.
4. Unscrew the same hose from the ice bath drain.
5. Connect the extendable 75cm drainage hose to the ice bath drain.
6. Open the tap on the ice bath drain to let the water drain out.

Why should I use hydrogen peroxide to clean my chiller and ice bath?

Hydrogen peroxide is a natural disinfectant that kills bacteria, mold, and algae. Using a diluted solution helps break down organic buildup, keeping your ice bath and chiller cleaner for longer.

What concentration of hydrogen peroxide should I use?

A 3% to 6% hydrogen peroxide solution is safe and effective for cleaning. You can mix it with water in a spray bottle for easy application.

How do I make the cleaning solution?

• For a 3% solution: Use 3% hydrogen peroxide straight from the bottle (no dilution needed). You can find 3% hydrogen peroxide at most pharmacies, supermarkets, or online.
• For a stronger clean (up to 6%): Mix equal parts hydrogen peroxide and water (e.g., 1 cup hydrogen peroxide + 1 cup water) to dilute the hydrogen peroxide by half. For example if you purchased 12% hydrogen peroxide, diluting with an equal part of water will dilute it to 6%.

How do I clean my ice bath and thermal lid with hydrogen peroxide?

1. Empty the ice bath and remove any debris.
2. Spray the hydrogen peroxide solution generously on the interior surfaces, including the thermal lid.
3. Let it sit for a few minutes to break down algae, bacteria, and grime.
4. Scrub with a soft brush or sponge to remove any remaining buildup.
5. Rinse thoroughly with clean water before refilling.

How often should I deep clean my ice bath with hydrogen peroxide?

• With every water change: For regular maintenance and to keep your water cleaner for longer.
• After heavy use or visible buildup: If you notice algae, slime, or discolouration.

Is hydrogen peroxide safe for my ice bath materials?

Yes, hydrogen peroxide is safe for PVC and metal materials. Always rinse well after cleaning.

Will hydrogen peroxide affect the water quality?

No, once rinsed, it breaks down into water and oxygen, leaving no harmful residues.

Can I use hydrogen peroxide to keep the water clean between changes?

Yes, adding a small amount (½ cup of 3% hydrogen peroxide per 100L of water) can help inhibit algae and bacteria growth.

Where can I buy hydrogen peroxide?

You can find 3% hydrogen peroxide at most pharmacies, supermarkets, or online.

By following these steps, your ice bath will stay cleaner, fresher, and free from harmful buildup!